Twin Screw Extrusion Fish Feed Production Line – Turnkey Solution
CE Certified
ISO Certified
60+ Countries

Twin Screw Extrusion Fish Feed Production Line – Turnkey Solution

<p><strong>Complete Aquatic Pellet Manufacturing Fish Feed Production Line</strong>, Twin Screw Extruder, 0.5-12mm Pellet Size, Stainless Steel Construction — designed for precise aquatic feed production.</p> <p>Twin-screw extrusion technology enables precise control over <strong>screw configuration, barrel temperature profile, and die design</strong> to achieve target pellet density and floatation characteristics. Process engineers can specify parameters for floating or sinking feed based on raw material formulation and moisture content.</p> <p>In-house testing workshop validates pellet specifications on your actual raw material before shipment, with complete documentation including screw configuration records and capacity calculations.</p>

High Efficiency
Customizable
PLC Control
After-Sales Support

Product Description

Precision screw geometry — twin-screw extrusion configuration specified to your aquatic feed formulation controls pellet density and floatation behaviour before the line ever leaves the factory.

Technical Specifications

Parameter Value
Product Type Twin Screw Extrusion Aquatic Feed Production Line
Output Capacity 500 kg/h (basis not stated in source — confirm raw material formulation and moisture content)
Pellet Size Range 0.5 mm to 12 mm
Extruder Type Twin Screw
Screw Configuration Twin-screw extrusion system (configuration details subject to formulation)
Control System Simple control panel (PLC / MCC option available)
Main Structure Material Stainless Steel
Line Stations Feeding, mixing, extruding, pelletizing (dryer, cooler, coating, packing configurable)
Automation Level Fully Automatic
Power Rating Not stated in source
Voltage & Frequency Configurable to destination grid
Standards CE and ISO certified manufacturing

Application Suitability

Application Material or Output
Floating catfish and tilapia grow-out pellets High-starch formulations requiring controlled expansion for positive buoyancy
Sinking shrimp feed pellets High-protein formulations demanding dense, slow-sinking characteristics
Fry and fingerling starter feed 0.5 mm to 2 mm micro pellets from fine-ground protein and carbohydrate blends
Multi-species aquaculture feed mills Flexible die changes covering 0.5 mm to 12 mm across production runs

Why Pellet Density Fails Before the Extruder Even Starts

Floatation problems originate in screw configuration and barrel temperature profiling, not in the dryer or the coating drum.

A buyer specifies a line rated at a certain hourly output, but the actual raw material — high-protein fish meal blends or starch-heavy grain mixes — behaves entirely differently under shear and heat than the generic test formulation. The twin screw extrusion aquatic feed production line technology must account for this gap. When the screw elements are copied from a standard build without matching the buyer’s formulation, the gelatinisation window shifts, expansion becomes inconsistent, and pellets that should float end up sinking within minutes of hitting the water. [NEED_CITE: starch gelatinisation temperature thresholds in high-protein aquatic feed formulations]

The real cost is not the wasted batch. It is the two weeks of trial-and-error on site while your commissioning engineer adjusts parameters that should have been locked in before the machine shipped.

Twin screw extrusion aquatic feed production line technology showing barrel assembly and die plate configuration

Barrel Zone Temperature Profiling and Starch Gelatinisation

The twin screw extrusion aquatic feed production line technology depends on precise thermal management across multiple barrel zones. Each zone contributes differently: upstream zones handle hydration and initial mixing, while downstream zones build the shear energy required for starch gelatinisation. If the temperature profile is too flat, the material passes through without reaching the gelatinisation threshold, resulting in low expansion and pellets that lack structural integrity. Process engineers must specify barrel zone counts and heating capacity against their formulation’s specific gelatinisation curve.

Shear Energy, Screw Element Sequencing, and Pellet Density

Beyond temperature, the sequencing of conveying, kneading, and reverse screw elements determines how much mechanical energy the material absorbs. High-protein aquatic feed formulations require different shear profiles than starch-dominant recipes. A screw configuration built for floating pellets will over-expand high-protein mixes, creating fragile pellets that break during conveying and coating. The screw element arrangement must be documented and matched to the buyer’s target density specification before production begins. [NEED_CITE: twin-screw element sequencing effects on extrudate density in feed applications]

Reading the Specs That Actually Matter for Aquatic Feed

Pellet size range from 0.5 mm to 12 mm is driven by die selection and cutting mechanism configuration, but the usable range depends on formulation behaviour at each extreme. Micro pellets below 2 mm require fine die apertures that increase backpressure, demanding a screw configuration capable of maintaining stable flow without surging. At the upper end, 12 mm pellets need sufficient expansion control to prevent hollow centres. Stainless steel construction in food-grade contact zones supports both hygiene requirements and corrosion resistance when processing fish meal and marine-based protein sources. The control system governs barrel zone setpoints, screw speed, and feeder rates — parameters that must be adjustable in real time as operators monitor pellet density at the die face. Automation level marked as fully automatic covers the coordinated sequencing of feeding, mixing, extruding, and pelletizing stations, though the specific PLC or MCC architecture should be confirmed against the buyer’s existing plant control infrastructure.

Control panel and barrel zone temperature display on twin screw aquatic feed extruder

What Happens When Screw Configuration Is an Afterthought

The commissioning period stretches well beyond the planned window. Operators run batch after batch adjusting moisture injection and barrel temperatures, searching for a floatation result that the wrong screw elements simply cannot deliver. Sinking feed for shrimp formulations may emerge too buoyant, floating on the surface where the animals cannot reach it. The downstream dryer runs at capacity but cannot correct a density problem that was baked into the pellet at the die. [NEED_CITE: common commissioning delays attributed to mismatched extruder configuration in feed mills]

Engineering Matched to Your Formulation, Not a Catalogue Default

Every twin screw extrusion aquatic feed production line technology deployment requires screw configuration documentation matched to the buyer’s specific raw material and target pellet specification. The in-house testing workshop runs trial extrusions on customer-supplied raw material before shipment, generating a trial run report that confirms pellet density, expansion ratio, and floatation behaviour against the agreed specification. Line layout and capacity calculation addresses throughput matching across all stations — feeding rate, extruder output, dryer residence time, and coating drum capacity — so no single station bottlenecks the line. Electrical schematics include voltage and frequency confirmation for the destination market grid, preventing commissioning delays caused by incompatible power supply. Wear parts lists document screw elements, die plates, and cutting blades specific to the configuration shipped, so replacement parts are available when the first changeover is due.

Documentation & Verification

  • Screw configuration record specifying element sequencing matched to your aquatic feed formulation
  • Trial run report on your raw material confirming pellet density and floatation before shipment
  • Line layout drawing with throughput calculations across feeding, extruding, drying, and coating stations
  • Electrical schematic with voltage and frequency confirmed for your facility grid
  • Wear parts list identifying screw elements and dies specific to your configuration

Installation, Commissioning & Support

  • Foundation plan specifying load points and floor leveling requirements for the extruder barrel assembly
  • Dedicated power circuit sized to the extruder motor rating with confirmed voltage and frequency
  • Pre-assembled barrel sections arriving with screw elements sequenced per your formulation record
  • First-run commissioning with barrel zone temperature profiling and die pressure adjustment on your material
  • Operator training covering screw speed, moisture injection, and die changeover procedures
  • Wear parts inventory recommendation based on your production volume and formulation abrasiveness

What We Need to Configure Your Line

Provide your raw material formulation including protein percentage, starch source, and target moisture content at the extruder inlet. Specify the pellet sizes you produce most frequently and the floatation requirement — floating, slow-sinking, or fast-sinking — for each species. Confirm your facility voltage, frequency, and whether your existing plant runs centralized PLC control or standalone panels.

Frequently Asked Questions

Q: How is screw configuration determined for a specific aquatic feed raw material formulation?
A: We review your formulation’s protein-to-starch ratio, fat content, and fibre levels, then select conveying, kneading, and reverse screw elements in a sequence that delivers the shear energy your material requires. A trial run on your actual raw material in our testing workshop confirms the configuration before shipment.

Q: What barrel temperature profile and moisture level are needed to achieve floating versus sinking pellet density?
A: Floating pellets generally require higher barrel zone temperatures and controlled moisture injection to maximise starch expansion at the die. Sinking pellets need lower expansion, achieved through reduced shear energy and adjusted moisture. Exact setpoints depend on your formulation’s gelatinisation behaviour.

Q: Can a trial run be conducted on the buyer’s raw material before shipment?
A: Yes. Our in-house testing workshop runs your actual raw material through the configured extruder, producing sample pellets for density, expansion ratio, and floatation testing. The trial run report ships with the machine and serves as the baseline for on-site commissioning.

Q: How does die design affect pellet size range and expansion ratio across the 0.5 mm to 12 mm spectrum?
A: Smaller die apertures increase backpressure and require screw configurations that maintain stable flow without surging. Larger apertures reduce backpressure but demand precise expansion control to prevent hollow centres. Die plate hole patterns and cutting mechanism speed together determine final pellet geometry and dimensional consistency.

Q: What process parameters should be adjusted when switching between fish species formulations on the same line?
A: Operators typically adjust barrel zone temperatures, screw speed, moisture injection rate, and die selection when changing formulations. The control system stores parameter sets for each recipe, reducing changeover time and maintaining batch-to-batch consistency across production runs.

15+
Years Experience
60+
Countries Served
1000+
Projects Delivered
24/7
Technical Support
Get a Custom Quote

Interested in Twin Screw Extrusion Fish Feed Production Line – Turnkey Solution?

Fill out the form below and our engineering team will respond within 24 hours with a tailored solution.

Sending your inquiry...

Your information is secure and will only be used to respond to your inquiry.

Explore more equipment from our product range

pet food making machine

MT70 Twin Screw Pet Food Extrusion Line | Technical Guide

<p><strong>MT70 Twin Screw Pet Food Extrusion Line, 380V 50Hz, PLC Control</strong> — engineered for precise kibble density and texture through matched screw configuration and die design.</p> <ul> <li>Barrel temperature profile and moisture control ensure consistent starch gelatinisation and expansion across dry kibble, semi-moist and treat recipes.</li> <li>Automated PLC and MCC integration across mixing, extrusion, drying and packaging stations maintains throughput balance.</li> <li>Screw geometry and die specifications are documented against your raw material and target product before production begins.</li> <li>Trial runs on customer-supplied raw materials are completed in our testing workshop, with full reports provided prior to shipment.</li> </ul>

View Details
pet food making machine

1.0-1.5t/h Twin Screw Fish Feed Extrusion Line | Turnkey Solution

<p><strong>Twin Screw Fish Feed Extrusion Line, 1.0–1.5 t/h, 304 Stainless Steel</strong> — engineered for floating and sinking aquaculture feed production across trout, salmon, and catfish species.</p> <ul> <li>Screw configuration and die design specified to raw material formulation and target pellet density</li> <li>Barrel temperature profile tuned for starch gelatinisation, expansion control, and consistent floatation performance</li> <li>In-house trial runs on customer raw material before shipment validate output against buyer specifications</li> </ul> <p>Delivered as a throughput-matched line from extrusion through drying and coating, with documented screw and die configuration records retained for future reorders.</p>

View Details
pet food making machine

Aquatic Feed Extrusion Production Line for Fish Feed – Specifications

<p><strong>Aquatic Feed Extrusion Production Line, Twin-Screw, 0.5–12mm Pellet Range, CE/ISO</strong> — engineered for floating and sinking feed across fry to adult growth stages. Screw configuration, barrel temperature profile and die design are matched to your raw material formulation, controlling starch gelatinisation and expansion to achieve precise pellet buoyancy and density. In-house testing workshop validates output on your actual ingredients before shipment, with full screw and die configuration records provided.</p>

View Details
pet food making machine

Pet Food Making Machine for Dog Cat Feed – Extrusion Technology

<p><strong>Premium Pet Food Processing Equipment Dog Cat Feed Making Machine</strong> with twin-screw extrusion and PLC control — engineered for consistent kibble density and starch gelatinisation across dry pet food and aquatic feed formulations.</p> <p>Screw element sequence, barrel temperature zones and die geometry are matched to your specific raw material blend, controlling shear and moisture to achieve the target expansion ratio and pellet texture.</p> <ul> <li>Complete line from batching through extrusion, drying, flavouring to packing under one supplier</li> <li>In-house testing workshop runs your actual raw material before shipment to validate parameters</li> <li>Process documentation including screw configuration record and trial run report provided</li> </ul>

View Details