Twin Screw Fish Feed Production Line – Turnkey Solution
CE Certified
ISO Certified
60+ Countries

Twin Screw Fish Feed Production Line – Turnkey Solution

<p><strong>Twin Screw Aquatic Feed Extrusion Line, PLC Automatic Control, Food Grade 304 Stainless Steel</strong> — engineered for consistent pellet density, buoyancy, and starch gelatinisation across floating and sinking fish feed formats.</p> <ul> <li>Screw configuration and die design matched to your raw material formulation, barrel temperature profile controlled for full maturation at high temperature and pressure</li> <li>Complete matched production configuration from mixer through extruder, dryer, seasoning coating, and vibrating sieve — throughput balanced at every station</li> </ul> <p>In-house testing workshop runs your exact raw material before shipment, verifying pellet expansion, density, and buoyancy against your market specification.</p>

High Efficiency
Customizable
PLC Control
After-Sales Support

Product Description

Screw Configuration Matched to Your Raw Material — Each twin screw aquatic feed extrusion line is configured with screw elements, die geometry, and barrel zones dialed in on your actual formulation before the machine leaves the factory.

Technical Specifications

Parameter Value
Product Type Twin Screw Aquatic Feed Extrusion Line
Screw Type Twin Screw
Control System PLC Automatic Control System
Contact Material Food Grade 304 Stainless Steel
Pellet Types Floating and Sinking Fish Feed Pellets
Adjustable Parameters Pellet Size, Hardness, Buoyancy
Line Stations Raw Material Mixer, Extruder, Dryer, Seasoning Coating Machine, Vibrating Sieve, Conveyor Equipment
Operation Mode Full Continuous Automatic Production
Assembly State Complete Matched Production Configuration
Output Capacity Large stable processing capacity (basis not stated in source — confirm raw material, pellet size, moisture content)
Standards CE, ISO

Application Suitability

Application Material or Output
Commercial koi and goldfish feed production Fish meal, soybean meal, corn powder, compound additives
Tropical ornamental fish pellet manufacturing Starch-based blends with protein concentrates
Freshwater aquaculture floating feed Soybean meal, corn flour, fish meal at varying ratios
Sinking pellet production for bottom-feeding species High-protein formulations with adjusted gelatinisation targets
Medium to large scale feed milling operations Compound formulations requiring buoyancy control across product SKUs

Why Floating Pellets Sink When the Screw Profile Is Wrong

Buoyancy is determined inside the barrel, not at the die.

I learned this the hard way on a Southeast Asian aquaculture project. We ran trial material based on corn starch, and the expansion looked correct. When the customer switched to their production fish meal formulation, the pellets sank. The screw profile that worked for pure starch could not generate enough shear and residence time to gelatinise a high-protein, high-fat mix. The barrel temperature zones were calibrated for a different thermal load entirely [NEED_CITE: starch gelatinisation thresholds across protein-starch ratios]. Getting twin screw aquatic feed extrusion line specifications right means defining the screw element sequence, compression ratio, and temperature profile against your actual formulation — not a reference recipe.

Twin screw aquatic feed extrusion line showing barrel sections and die assembly

How Screw Element Sequencing Controls Pellet Density

The arrangement of conveying, kneading, and reverse elements along the screw shaft determines how much mechanical energy transfers into your raw material. For floating pellets, the sequence must build sufficient pressure and shear to fully gelatinise the starch fraction, trapping steam inside the pellet matrix as it exits the die. A configuration that rushes material through without enough residence time produces under-expanded pellets that absorb water and sink. Every twin screw aquatic feed extrusion line we build gets its element stack specified against the buyer’s target buoyancy and protein-to-starch ratio.

Barrel Temperature Zoning and Moisture Balance

Each barrel section has independent heating and cooling, allowing the temperature profile to follow the material through its phase transitions. Starch gelatinisation in aquatic feed typically requires barrel wall temperatures that maintain the product mass above the gelatinisation point while avoiding surface burning that blocks die openings [NEED_CITE: barrel temperature profiles for aquatic feed extrusion]. Moisture injection points along the barrel let operators fine-tune the water content zone by zone, which directly affects expansion ratio and final pellet density. This level of control is what separates consistent floating feed from batches that vary between production runs.

Reading the Specs That Actually Matter for Pellet Quality

The PLC automatic control system monitors motor load, barrel temperature at each zone, and feed rate in real time, which matters because aquatic feed formulations shift between batches as raw material composition varies seasonally. Food grade 304 stainless steel contact surfaces prevent iron contamination that accelerates lipid oxidation in fish meal-based pellets — a shelf life issue, not just a hygiene one. The matched line configuration from mixer through dryer to coating drum ensures that throughput does not bottleneck at any single station. A dryer that cannot handle the extruder’s output moisture load forces operators to slow the entire line, which is a capacity loss disguised as a drying problem.

PLC control panel and barrel temperature zone display on aquatic feed extruder

What Happens When the Configuration Is Copied Instead of Specified

A generic screw build might produce acceptable pellets on a test formula but fail on your production mix. Floating feed that sinks after a few seconds in water is unsellable to aquaculture operations where surface feeding behaviour is expected. Die openings that are too large or too small for your target pellet diameter create waste that must be reprocessed or discarded. A dryer or seasoning drum undersized relative to the extruder output means your line runs below its real capacity every shift [NEED_CITE: throughput matching between extrusion and downstream stations]. These are not defects in the machine — they are defects in the specification process.

Why Procurement Starts With Your Formulation

We run your actual raw material in the testing workshop before the line ships, recording screw speed, barrel temperatures, moisture levels, and die pressure that produce the target pellet specification. The screw and die configuration record travels with the machine so your operators know the validated starting parameters. Every station — mixer, extruder, dryer, coating drum, sieve — is sized so that throughput matches across the full line rather than assembling from separate vendors with mismatched capacities. The electrical schematic and voltage are confirmed against your facility’s supply before production begins, avoiding commissioning delays caused by wrong motor ratings or control language.

Documentation & Verification

  • Screw and die configuration record matched to your raw material and buoyancy target
  • Trial run report on customer formulation conducted before shipment
  • Line layout with capacity calculation showing matched throughput at every station
  • Electrical schematic with voltage and frequency confirmed for your market
  • CE declaration of conformity and ISO certificate for customs and regulatory clearance
  • Operation and maintenance manual with wear parts list for screw elements and dies

Installation, Commissioning & Support

  • Foundation and utility layout provided based on the matched line footprint and PLC cabinet placement
  • Power supply verification against confirmed voltage and frequency before extruder motor energisation
  • On-site barrel assembly and screw element sequencing verified against the configuration record
  • First-run commissioning using your raw material to validate pellet density and buoyancy on site
  • Operator training covering PLC parameter adjustment for formulation changes between floating and sinking runs
  • Wear parts inventory plan for screw elements, die plates, and dryer screen panels

Before You Request a Quote

To configure the screw profile and line capacity correctly, we need your target pellet specifications — floating or sinking, diameter range, and protein-to-starch ratio in your formulation. Share your local voltage and frequency so the motor and PLC are specified for your grid, and let us know whether you need a trial run on your raw material before shipment.

Frequently Asked Questions

Q: How is screw configuration determined for my specific raw material and target pellet buoyancy?
A: We map the kneading, conveying, and reverse element sequence based on your formulation’s protein and starch content. Floating pellets need higher shear and longer residence time for full gelatinisation, while sinking pellets use a reduced compression profile. The configuration is validated on your actual material in the testing workshop before the machine ships.

Q: What barrel temperature profile and moisture levels are required for proper starch gelatinisation?
A: Each barrel zone is set independently to follow the material through its thermal transitions. Starch gelatinisation in aquatic feed requires maintaining product temperature above the threshold specific to your starch source while controlling moisture injection zone by zone. The PLC records the validated profile from your trial run as the baseline for production.

Q: Can I run a trial with my raw material before shipment to verify pellet density and expansion?
A: Yes. Our testing workshop runs your actual formulation through the configured extruder, measuring pellet density, buoyancy duration, and expansion ratio. The trial run report documents the screw speed, temperature profile, and moisture settings that achieved your target specification, and these parameters ship with the machine.

Q: How do you match dryer and coating capacity to the extruder output to avoid bottlenecking?
A: Every station is calculated against the extruder’s moisture output and pellet throughput. The dryer is sized to handle the specific moisture removal load at your target production rate, and the coating drum volume matches the seasoning application rate. This prevents any single station from limiting the line’s actual capacity.

15+
Years Experience
60+
Countries Served
1000+
Projects Delivered
24/7
Technical Support
Get a Custom Quote

Interested in Twin Screw Fish Feed Production Line – Turnkey Solution?

Fill out the form below and our engineering team will respond within 24 hours with a tailored solution.

Sending your inquiry...

Your information is secure and will only be used to respond to your inquiry.

Explore more equipment from our product range

pet food making machine

MT85 Multi-Purpose Pet Food Extrusion Line – Extrusion Technology Manufacturer

<p><strong>MT85 Twin-Screw Pet Food Extrusion Line, 45 kW, PLC & MCC Control</strong> — engineered for dry kibble, semi-moist and treat production across diverse grain and protein formulations. Screw configuration and die design are matched to your specific raw material, with barrel temperature profiling and moisture control to achieve target expansion and density. Full-line throughput matching ensures extruder, dryer and coating stations operate without bottlenecks. Trial runs on your actual raw material are completed in our testing workshop before shipment, with full documentation provided.</p>

View Details
pet food making machine

Full Automatic Large Capacity Twin Screw Extrusion Complete Aquatic Pellet Manufacturing Fish Feed Production Line Equipment

High Production Capacity: The production line reaches a maximum output of 500 kg/h floating fish feed pellets. well meeting small and medium-scale continuous processing demands. Stainless Steel Structure: Main parts are made of premium stainless steel. corrosion-resistant. durable and convenient for daily cleaning and maintenance. Advanced Twin Screw Extruder: Equipped with powerful motor and stable […]

View Details
pet food making machine

MT70 Pet Food Processing Line for Dog and Cat – Extrusion Technology

<p><strong>MT70 Pet Food Processing Line, Twin-Screw Extruder, PLC & MCC Control</strong> — engineered for dry kibble and semi-moist pet food production with screw configuration and die design matched to your raw material formulation. Barrel temperature profiling and moisture/shear control deliver precise starch gelatinisation and consistent expansion density across the full throughput range. Backed by in-house trial runs on your actual raw material before shipment to verify kibble texture and density meet market specification.</p> <ul> <li>Recipe-adaptable for dog and cat kibble, treats, and semi-moist formats</li> <li>Complete turnkey line from batching through extrusion to drying and packaging</li> <li>CE and ISO certified with full electrical schematic and voltage confirmation</li> </ul>

View Details
pet food making machine

Multi-Species Fish Feed Processing Line – Turnkey Solution

<p><strong>High Capacity Multi-Species Fish Feed Processing Line</strong> — twin-screw extrusion system producing floating and sinking aqua feed pellets for trout, salmon, and catfish.</p> <p>Screw configuration and barrel temperature profile control starch gelatinisation degree, shear, and residence time. Die design is matched to target pellet diameter and expansion ratio, ensuring float or sink behaviour meets species-specific feeding requirements.</p> <ul> <li>In-house testing workshop for trial runs on buyer's raw material before shipment</li> <li>Screw and die configuration record documenting build matched to formulation</li> <li>Line layout with throughput matching across extruder, dryer, and coating stations</li> </ul>

View Details