MT85 Twin-Screw Pet Food Extrusion Line – Extrusion Technology Specifications
CE Certified
ISO Certified
60+ Countries

MT85 Twin-Screw Pet Food Extrusion Line – Extrusion Technology Specifications

<p><strong>MT85 Twin-Screw Pet Food Extrusion Line, 45 kW, 380V 50Hz, PLC & MCC Control</strong> — engineered with screw configuration and die geometry matched to your raw material formula and target kibble density. Barrel temperature profiling and moisture-shear control govern starch gelatinisation, expansion ratio, and final product texture across drying and packaging stations. Backed by in-house trial runs on your actual recipe before shipment, with documented throughput verification and screw-die configuration records.</p> <ul> <li>Twin-screw extrusion with application-specific screw and die setup</li> <li>Fully automated batching-to-packaging workflow</li> <li>CE, ISO certified with food-grade contact materials</li> </ul>

High Efficiency
Customizable
PLC Control
After-Sales Support

Product Description

Screw Profile Validation — Trial runs on your actual formula are completed in the testing workshop before any MT85 twin-screw pet food extrusion line leaves the factory, locking in die pressure, expansion ratio and kibble density against your specification.

Technical Specifications

Parameter Value
Model MT85
Product Type Twin-Screw Pet Food Extrusion Line
Output Capacity 500 kg/h (basis not stated in source — confirm raw material formula, moisture content and kibble size)
Rated Power 45 kW
Voltage & Frequency 380V 50Hz Three Phase
Control System PLC and MCC
Screw Type Twin-screw
Line Stations Mixing → Extrusion → Drying → Packaging
Automation Level Fully automated from raw material mixing to packaging
Construction Food-grade contact materials
Certification CE, FDA, ISO

Application Suitability

Application Material or Output
Dry kibble production Corn flour, meat meal, poultry by-product meal, grain blends
Semi-moist pet food formulations High-moisture meat slurries, glycerin-based doughs
Pet treat extrusion Starch-rich or protein-dense treat recipes
Multi-species manufacturing Recipe changeover for dog, cat, bird and fish feed on a single line

What "500 kg/h on Paper" Actually Means on the Floor

Nominal capacity figures are meaningless without the raw material formula, moisture percentage and kibble dimension attached to them.

A twin-screw pet food extrusion line rated at a flat throughput number often fails to hold that output once the buyer switches to a locally sourced protein meal or alters the starch-to-fat ratio. The barrel pressure spikes, the die clogs or the kibble density drifts outside the target band. I have watched lines stall at barely half the quoted rate because the screw configuration was copied from a generic corn-based recipe while the client was running chickpea meal with a completely different gelatinisation window. Verifying the twin-screw pet food extrusion line specifications against your actual ingredients in a controlled trial prevents these production-floor surprises. [NEED_CITE: impact of raw material substitution on extruder throughput and die pressure]

MT85 twin-screw pet food extrusion line showing barrel sections and die assembly

How Screw Configuration Shapes Kibble Density and Expansion

The twin-screw geometry inside the MT85 barrel determines shear intensity, residence time and the degree of starch gelatinisation. Each screw element — conveying, kneading or reverse-pitch — is selected to match the amylose content and particle size of the buyer’s grain and protein blend. A kibble that must sink slowly in a fish bowl needs a different compression profile than a crunchy dog treat that must shatter cleanly at first bite.

Barrel Temperature Zones and Moisture-Shear Balance

Precise barrel temperature profiling across multiple heating zones controls the expansion ratio as the melt exits the die. Moisture injection points work in tandem with screw shear to regulate dough viscosity. Too much heat too early causes premature flash-off and hollow centres; too little leaves un-gelatinised starch cores that crumble during drying. The twin-screw pet food extrusion line specifications screw configuration die design package for the MT85 maps each zone set-point to the buyer’s target moisture at the dryer inlet. [NEED_CITE: starch gelatinisation temperature ranges for common pet food grains]

Reading the Core Parameters for Your Recipe

The 45 kW main drive provides the torque envelope needed for high-protein recipes that demand higher shear energy than simple starch puffs. A PLC and MCC control architecture allows operators to store recipe-specific set-points — screw speed, barrel zone temperatures, feeder rates — and recall them during changeover, which is essential when the same line produces both cat kibble and dog treats across a shift. Food-grade contact materials throughout the product path eliminate cross-contamination risk between medicated and standard formulations. Twin-screw extrusion, unlike single-screw, tolerates wider moisture and fat variation without surging, making it the practical choice for semi-moist formulations that would stall a single-screw machine.

PLC control panel and MCC cabinet for MT85 extrusion line

The Hidden Cost of Skipping Pre-Shipment Trials

When an extrusion line ships without a documented trial on the buyer’s raw material, the first week of commissioning becomes an expensive experiment. Engineers burn raw material chasing the right die pressure, the dryer is already oversized or undersized before the kibble moisture stabilises, and coating adhesion fails because the surface porosity was never dialled in. These losses compound when the line is installed far from the manufacturer’s home base and every return visit means flights, visas and idle production days. [NEED_CITE: cost impact of post-installation troubleshooting versus pre-shipment validation]

Why Procurement for This Class of Line Starts Here

Screw configuration and die geometry are specified to the buyer’s formula, not pulled from a generic catalogue, so the MT85 arrives with a documented profile rather than a guess. Every station — mixer, extruder, dryer, flavouring drum, packer — is throughput-matched by one supplier, eliminating the bottleneck that appears when components are sourced separately. An in-house testing workshop allows trial runs on customer-supplied raw material before the line is crated, producing a written report that travels with the shipment. Electrical schematics and voltage confirmations are finalised against the destination plant’s supply standard before production begins. PLC and MCC panels are built with the operator’s language and local safety conventions already loaded, reducing day-one commissioning delays.

Documentation & Verification

  • Line layout and capacity calculation matched to your kibble size and formula moisture content
  • Screw and die configuration record specific to your raw material blend
  • Electrical schematic confirming voltage and frequency for your plant supply
  • Trial run report generated on your ingredients in the testing workshop
  • CE declaration of conformity and ISO certificate for customs clearance

Installation, Commissioning & Support

  • Foundation plan showing load points for the 45 kW extruder and downstream dryer
  • Power distribution diagram for 380V 50Hz three-phase supply with dedicated breaker sizing
  • Modular barrel sections shipped separated to reduce freight volume and simplify on-site assembly
  • First-run parameter log covering screw speed, zone temperatures and feeder calibration
  • Operator training sessions on PLC recipe storage and MCC safety interlocks
  • Wear parts list with recommended reorder intervals for screw elements and die inserts

Preparing Your Enquiry

Share your target kibble dimensions, the primary protein and starch sources in your formula, and the moisture range you plan to run. Include your plant’s voltage, frequency and preferred control language so the electrical package can be confirmed before quotation. If you are producing multiple species on one line, list each recipe to allow screw profile and die selection for every changeover.

Frequently Asked Questions

Q: How is the 500 kg/h output capacity verified, and on which raw material formula does it hold?
A: The 500 kg/h figure is a reference point that must be validated against your specific recipe, moisture content and kibble geometry. A trial run in the testing workshop confirms the achievable throughput on your actual ingredients, and the resulting capacity figure is recorded in the trial report that ships with the line.

Q: How are screw configuration and die geometry selected for my specific recipe?
A: The screw profile is built from conveying, kneading and reverse elements chosen to match the starch gelatinisation window and protein content of your formula. Die geometry is sized to deliver the target kibble density and expansion ratio, then validated during the pre-shipment trial.

Q: What does the in-house trial run cover, and what documentation arrives with the line?
A: The trial run tests your raw material through mixing, extrusion and drying to verify throughput, texture and density. You receive a written trial report, the screw and die configuration record, and a sample batch of finished kibble for your own lab analysis.

Q: Can the 380V 50Hz supply be adapted to my plant’s electrical standard?
A: Voltage and frequency are confirmed against your plant’s supply during the specification phase. Motor ratings, heater elements and control transformer taps are then adjusted so the PLC and MCC panels match your local grid without on-site rewiring.

15+
Years Experience
60+
Countries Served
1000+
Projects Delivered
24/7
Technical Support
Get a Custom Quote

Interested in MT85 Twin-Screw Pet Food Extrusion Line – Extrusion Technology Specifications?

Fill out the form below and our engineering team will respond within 24 hours with a tailored solution.

Sending your inquiry...

Your information is secure and will only be used to respond to your inquiry.

Explore more equipment from our product range

pet food making machine

Technical Guide MT85 Twin-Screw Pet Food Extrusion Line for Dogs Cats

<p><strong>MT85 Twin-Screw Pet Food Extrusion Line, 45 kW, PLC Controlled</strong> — engineered for precise starch gelatinisation, expansion ratio and kibble density control. Screw configuration and die geometry are matched to your raw material blend rather than copied from generic builds, with multi-zone barrel temperature management ensuring consistent texture across dry kibble, semi-moist and treat formats.</p> <ul> <li>Full turnkey line throughput balanced from mixing through drying to packaging</li> <li>In-house trial runs on customer raw material before shipment validate output and product spec</li> <li>Complete documentation package including screw configuration record and line layout with capacity calculation</li> </ul>

View Details
pet food making machine

Premium Pet Food Processing Equipment Dog Cat Feed Making Machine – Factory Supply

<p><strong>Twin Screw Pet Food Extrusion Line, Up to 3 Tons/Hour Output, 1-Year Warranty</strong> — engineered for dry dog, cat and fish feed production with screw configuration and barrel temperature profile matched to your raw material formula.</p> <ul> <li>Die design and moisture/shear control ensure target kibble density, expansion and texture across pet and aquatic feed applications</li> <li>Trial runs on your raw material verify extrusion parameters before shipment, with full line layout and capacity calculation provided</li> </ul>

View Details
pet food making machine

Production Line Twin Screw Extrusion Fish Feed Pellet Manufacturing Machine

<p><strong>Twin Screw Fish Feed Extrusion Production Line, PLC Control, Food-Grade 304 SS</strong> — complete aquatic feed line from mixing through extrusion, drying, coating to packing.</p> <ul> <li>Screw configuration and die design specified to your raw material and target buoyancy, controlling expansion, density and pellet surface finish under high temperature and high pressure.</li> <li>Pellet size, hardness and floating or sinking behavior adjustable across species like koi, goldfish, tropical fish and freshwater fish.</li> </ul> <p>Every station throughput is matched under one supplier, and a trial run on your raw material is completed in our testing workshop before shipment.</p>

View Details
pet food making machine

Automatic Twin-Screw Floating Fish Feed Extrusion Line – Turnkey Solution

<p><strong>Twin-Screw Floating Fish Feed Extrusion Line, 500 kg/h Output, 0.5–12 mm Pellet Range</strong> — engineered for controlled buoyancy and starch gelatinisation across aquatic feed formulations.</p> <ul> <li>Screw configuration and barrel temperature profiling matched to raw material for consistent pellet expansion and density</li> <li>Die geometry selected per target pellet size, covering fry to adult growth stages with rapid changeover</li> </ul> <p>Trial runs on buyer's actual raw material are completed in-house before shipment, with full screw and die configuration records provided for process repeatability.</p>

View Details