MT70 Twin-Screw Pet Food Processing Line for Dog & Cat Kibble – Technical Guide
CE Certified
ISO Certified
60+ Countries

MT70 Twin-Screw Pet Food Processing Line for Dog & Cat Kibble – Technical Guide

<p><strong>MT70 Twin-Screw Pet Food Processing Line, 100-200 kg/h, PLC & MCC Control</strong> — screw profile and die geometry are configured to your raw material blend and target kibble density, with barrel temperature zones and moisture injection set for precise starch gelatinisation and expansion control.</p> <ul> <li><strong>Twin-screw extrusion</strong> matched to formulation, supporting dry kibble, semi-moist food and pet treats</li> <li>Trial runs on your raw material in our in-house testing workshop before shipment, with documented screw and die configuration records provided</li> </ul>

High Efficiency
Customizable
PLC Control
After-Sales Support

Product Description

Screw configuration matched to formulation — The MT70 twin-screw line uses a dedicated testing workshop to validate screw profile, die geometry, and barrel temperature on the buyer’s actual pet food blend before the machine ships.

Technical Specifications

Parameter Value
Model MT70
Product Type Twin-Screw Pet Food Processing Line
Output Capacity 100–200 kg/h (basis not stated in source — confirm raw material formulation, moisture content and kibble density)
Screw Type Twin-screw
Voltage & Frequency 380V 50Hz Three Phase
Control System PLC and MCC
Line Stations Mixing and batching → Extrusion → Drying → Packaging
Supported Product Formats Dry kibble, semi-moist pet food, pet treats
Construction Food-grade contact materials throughout
Assembly State Complete processing line
Standards CE, ISO

Application Suitability

Application Material or Output
Dry kibble production for dogs and cats Corn, meat meal, poultry by-product, rice flour, vitamin premix
Semi-moist pet food formulation High-moisture protein blends with humectants and palatants
Pet treat extrusion Jerky-style doughs, starch-based chew treats, dental bones
Aquatic-style floating pellet runs Fish meal and starch blends requiring controlled expansion

What Generic Screw Configurations Cost Pet Food Producers

A copied screw profile that ignores your formulation will sink kibble density outside market specification.

When a twin-screw pet food extrusion line ships with a generic screw build, the extruder barrel may fail to reach the starch gelatinisation threshold your recipe demands. The result is kibble that either floats when it should sink, or crumbles under packaging vibration. I have watched high-fat Middle Eastern formulations stall on lines where nobody adjusted the screw elements before the trial — an entire batch was scrapped because the shear profile was set for a standard corn-and-meat-meal mix [NEED_CITE: twin-screw extrusion screw element geometry and shear rate effects].

The MT70 addresses this by requiring the buyer’s raw material on-site before configuration is locked.

MT70 twin-screw pet food extrusion line specifications showing barrel and screw assembly

Barrel Temperature Zones and Starch Gelatinisation Control

The barrel on this twin-screw pet food extrusion line is divided into independently heated zones, each governed by the PLC. Starch gelatinisation in a kibble formulation typically initiates between 70 °C and 90 °C, but the exact window shifts depending on the ratio of corn flour to meat meal and the incoming moisture level. Precise zone-by-zone temperature management prevents premature gelatinisation in the feed section, which can cause surging, and ensures full cook-out before the material reaches the die plate.

Die Geometry and Kibble Expansion Behaviour

Die orifice diameter, land length, and face pattern together govern the expansion ratio of the extrudate as it exits the barrel. A shorter land length produces higher radial expansion — suitable for a light, airy kibble aimed at small-breed dogs. A longer land length restricts expansion and yields a denser pellet for working-dog or large-breed formulations. The MT70 die is specified after the testing workshop confirms the expansion rate on the buyer’s actual blend, removing guesswork from the twin-screw pet food extrusion line specifications.

Reading the Core Parameters for Production Impact

The twin-screw configuration gives the MT70 a self-wiping action that single-screw extruders lack, which matters when switching between a high-fat salmon recipe and a lean chicken-and-rice formula — residue from the previous run is cleared mechanically rather than requiring a full barrel teardown. The PLC and MCC control architecture means that barrel temperature set-points, screw speed, and feeder rates are stored as named recipes, so a shift operator can recall a validated profile instead of re-entering numbers from a printed sheet. Food-grade contact materials throughout the product zone satisfy both CE machinery directive expectations and the hygiene standards that export-market retailers now audit [NEED_CITE: food contact material compliance for extrusion equipment in the EU]. Voltage at 380V 50Hz three-phase is standard for the line, but frequency and control language should be confirmed before production begins — a 60Hz market receiving a 50Hz motor will see screw RPM and throughput drift outside the tested window.

PLC control panel and MCC cabinet for the MT70 pet food processing line

The Hidden Cost of Skipping the Pre-Shipment Trial

When an extruder leaves the factory without a documented trial on the buyer’s formulation, the first production run becomes the trial. Ingredient cost, labour hours, and shipping schedule all burn while operators adjust screw elements, swap die plates, and chase a density target that was never validated. I once saw a South American producer spend three weeks re-calibrating a line because the supplier had shipped a configuration built for wheat-based kibble while the buyer’s recipe relied on cassava starch — completely different gelatinisation behaviour [NEED_CITE: starch gelatinisation temperature variance across botanical sources]. The MT70 testing workshop is designed to catch that mismatch before the crate is sealed.

Why Source This Line from Jinan MT Machinery

Every station — batching, extrusion, drying, packaging — is specified under one supplier, so throughput is balanced across the line rather than bottlenecked at the dryer. Screw and die configuration is documented against the buyer’s raw material and target kibble density, not pulled from a catalogue default. The in-house testing workshop runs the buyer’s formulation before dispatch, producing a trial run report that travels with the shipment. Twin-screw expertise covers pet food alongside aquatic feed, snacks, cereals, and protein applications, meaning process engineers have cross-category experience when a formulation behaves unexpectedly. Pre-sales consultation through installation, commissioning, and ongoing maintenance keeps the same technical team on the file from inquiry to first production shift.

Documentation & Verification

  • Machine specification sheet with barrel zone temperature profile and L:D ratio confirmation
  • Screw and die configuration record matched to your raw material blend
  • Trial run report on your formulation conducted before shipment
  • Electrical schematic with voltage, frequency, and control language confirmed prior to production
  • CE declaration of conformity and ISO certificate for customs and import compliance
  • Operation and maintenance manual with wear parts list

Installation, Commissioning & Support

  • Foundation plan sized to the MT70 line footprint with anchoring points for extruder and dryer vibration isolation
  • Dedicated three-phase 380V 50Hz circuit with breaker rating matched to total connected load
  • Extruder barrel segments and screw shafts arrive separately and are assembled on-site to verified alignment
  • First-run commissioning includes barrel temperature calibration and screw speed validation against trial run data
  • Operator training covers PLC recipe recall, feeder adjustment, and emergency stop sequences in the confirmed control language
  • Wear parts list identifies screw elements, die plates, and cutter bearings with recommended replacement intervals

What to Include in Your Inquiry

Share your target kibble formulation — including the primary protein source, starch type, fat percentage, and desired moisture content after drying. Specify the voltage and frequency available at your facility, and note the control language your operators require. If you can send a sample of your raw material blend, the testing workshop will run it on the MT70 and return a trial report before any purchase commitment is made.

Frequently Asked Questions

Q: How is screw configuration and die design matched to my specific pet food formulation?
A: Before the MT70 ships, your raw material blend is run in our testing workshop. Screw elements are arranged and die geometry is selected based on the expansion rate, density, and texture achieved during that trial. The validated configuration is recorded and shipped with the line so you start production with a proven setup rather than a generic build.

Q: Can I send my raw material for a trial run before the line ships?
A: Yes. We require a sample of your formulation to conduct a trial in the in-house testing workshop. The resulting trial run report documents barrel temperatures, screw speed, moisture levels, and kibble density, giving you verified twin-screw pet food extrusion line specifications before the equipment leaves the factory.

Q: How do barrel temperature zones and moisture injection affect kibble expansion and density?
A: Each barrel zone is independently controlled by the PLC. Moisture injection timing and volume determine where starch gelatinisation initiates. Higher moisture in the early zones promotes earlier gelatinisation and greater expansion at the die; lower moisture delays the cook and produces a denser kibble. The trial run establishes the correct zone profile for your recipe.

Q: What is the difference between twin-screw and single-screw extrusion for my product type?
A: Twin-screw extruders provide a self-wiping action that handles high-fat and high-moisture formulations more consistently than single-screw designs. They also allow a wider range of screw element arrangements, giving process engineers more variables to control texture, density, and cook degree across different pet food recipes.

15+
Years Experience
60+
Countries Served
1000+
Projects Delivered
24/7
Technical Support
Get a Custom Quote

Interested in MT70 Twin-Screw Pet Food Processing Line for Dog & Cat Kibble – Technical Guide?

Fill out the form below and our engineering team will respond within 24 hours with a tailored solution.

Sending your inquiry...

Your information is secure and will only be used to respond to your inquiry.

Explore more equipment from our product range

pet food making machine

MT70 100-200kg/h Dog & Cat Pet Food Processing Line with 380V 50Hz Three Phase Power

1. Full Automation & High Efficiency The production line offers fully automated processes from raw material mixing. extrusion. drying. to packaging. greatly reducing manual labor and increasing output efficiency. 2. Versatile Recipe Adaptability Supports a wide range of pet food formulas including dry kibble. semi-moist. and treats. catering to different pet dietary requirements and market […]

View Details
pet food making machine

Twin Screw Floating Fish Feed Extrusion Production Line – Turnkey Solution

<p><strong>Twin Screw Floating Fish Feed Extrusion Production Line, 0.5–12 mm Pellet Range, Stainless Steel Construction</strong> — engineered for stable floatability and consistent pellet density across ornamental and aquaculture feed applications.</p> <ul> <li>Screw configuration and barrel zone temperature profiling are matched to raw material formulation, controlling starch gelatinisation and expansion rate for target sinking/floating behaviour.</li> <li>Die geometry and moisture conditioning determine final pellet density, with adjustable sizing from 0.5 mm to 12 mm to cover multiple fish growth stages on one line.</li> </ul> <p>Every line ships with a trial run report on your raw material in our testing workshop, screw and die configuration records specified to your formulation, and electrical schematics confirmed to your destination market voltage.</p>

View Details
pet food making machine

Integrated Continuous Automatic Fish Feed Drying and Cooling Pellet Dryer Cooler Complete Aquatic Feed Equipment

High Production Capacity: The production line reaches a maximum output of 500 kg/h floating fish feed pellets. well meeting small and medium-scale continuous processing demands. Stainless Steel Structure: Main parts are made of premium stainless steel. corrosion-resistant. durable and convenient for daily cleaning and maintenance. Advanced Twin Screw Extruder: Equipped with powerful motor and stable […]

View Details