MT70 Dog & Cat Pet Food Processing Line – PLC Control
CE Certified
ISO Certified
60+ Countries

MT70 Dog & Cat Pet Food Processing Line – PLC Control

<p><strong>MT70 Twin-Screw Pet Food Extrusion Processing Line, 100-200 kg/h, PLC Control</strong> — configured for dry kibble, semi-moist and treat recipes with full line integration from mixing through drying.</p> <p>Screw configuration and die geometry are matched to raw material behaviour and target kibble density, with barrel temperature profiling and moisture-shear control ensuring consistent starch gelatinisation and expansion across the extrusion zone.</p> <ul> <li>Delivered with screw/die configuration record, trial run report on buyer's raw material, and electrical schematic confirmed to site voltage before shipment.</li> </ul>

High Efficiency
Customizable
PLC Control
After-Sales Support

Product Description

Precision-Engineered Extrusion — The MT70 twin-screw line matches screw configuration and die geometry to your specific raw material blend, ensuring kibble density and expansion meet market expectations from day one.

Technical Specifications

Parameter Value
Model MT70
Product Type Pet Food Extrusion Processing Line
Screw Type Twin-screw
Output Capacity 100-200 kg/h (basis not stated in source — confirm raw material type, moisture content and kibble size)
Control System Fully automated PLC-controlled
Voltage & Frequency 380V 50Hz Three Phase
Line Stations Raw material mixing, extrusion, drying, packaging
Recipe Adaptability Dry kibble, semi-moist pet food, treats
Assembly State Complete production line
Material Food-grade contact materials throughout
Customization Layout and capacity configurable to factory size
Standards CE, ISO

Application Suitability

Application Material or Output
Dry Kibble Production Corn, meat meal, wheat, soy, vitamin premixes
Semi-Moist Pet Food High-protein blends, glycerin, moisture-retaining agents
Pet Treat Extrusion Starch-heavy or meat-based treat formulations
Capacity Expansion Manufacturers scaling from batch to continuous extrusion

Why Your Kibble Density Fails Market Specs — And How Screw Configuration Fixes It

Density and expansion are determined before the extruder ships, not during commissioning.

When a twin-screw pet food extrusion technology MT70 arrives with a generic screw build, the barrel shear profile rarely aligns with your actual raw material. I have seen lines spend weeks on-site trying to correct uneven expansion or kibble that sinks when it should float, because the L:D ratio and die land length were copied from a different product category [NEED_CITE: twin-screw extrusion parameter interaction with raw material composition]. The configuration must be specified at the engineering stage.

MT70 twin-screw pet food extrusion technology processing line showing barrel and die assembly

Barrel Temperature Profiling and Moisture-Shear Balance

The twin-screw pet food extrusion technology MT70 allows independent control across barrel zones, which is critical when formulations shift between high-starch and high-protein recipes. Moisture injection combined with shear heat determines the degree of starch gelatinisation, directly affecting both digestibility and the final kibble structure.

Die Geometry and Expansion Control

Die orifice size and land length govern the pressure drop at the barrel exit. A die designed for dense, slow-sinking aquatic feed produces entirely different expansion behaviour than one specified for light, porous dog kibble. The twin-screw pet food extrusion technology MT70 die configuration is selected based on the buyer’s target product specification before manufacturing begins.

Interpreting the Core Process Parameters

The rated output of 100-200 kg/h must be validated against your specific recipe, as moisture content and fat levels significantly influence throughput. The 380V 50Hz three-phase supply requires dedicated circuit capacity and voltage confirmation for your local grid before the electrical schematic is finalised [NEED_CITE: voltage and frequency standards by export market]. PLC control ensures that mixing ratios, barrel temperatures, and dryer residence times remain consistent across production runs, eliminating batch-to-batch variation that manual operation introduces. Food-grade contact materials throughout the product zone meet hygiene standards required for pet food certification in most export markets.

PLC control panel interface on the MT70 pet food extrusion line

The Cost of Skipping the Trial Run

When an extruder ships without a trial on your declared raw material, the first weeks of production become an expensive development exercise. Screw segments may need replacement, die inventory expanded, and dryer throughput re-balanced — all costs that fall on the buyer after installation [NEED_CITE: cost of post-installation line reconfiguration in food processing]. A pre-shipment trial run eliminates these variables.

Engineering Accountability, Not Just Machine Supply

The line is specified as a complete system from mixing through packaging, so throughput at each station is matched rather than bottlenecked. Screw and die records are documented against your raw material declaration, providing a baseline for future recipe adjustments. The in-house testing workshop conducts trial runs on customer-supplied material before crating, delivering a report with actual expansion and density data. Electrical schematics include confirmed voltage and control language for your target market, preventing commissioning delays. Layout calculations account for your factory footprint and utility connection points.

Documentation & Verification

  • Line layout and capacity calculation matching throughput across mixing, extrusion, drying, and packing stations
  • Screw and die configuration record specified to your declared raw material blend
  • Electrical schematic with confirmed voltage, frequency, and PLC interface language
  • Trial run report on customer raw material showing actual expansion and density results
  • Factory test record documenting operational parameters before dispatch
  • CE declaration of conformity and ISO certificate for market entry compliance

Installation, Commissioning & Support

  • Foundation planning based on line layout and station weight distribution
  • 380V 50Hz three-phase dedicated circuit with isolator and earth leakage protection
  • Modular station delivery allowing phased positioning within existing factory layouts
  • PLC parameter upload and recipe configuration during on-site commissioning
  • Operator training covering screw wear monitoring and die changeover procedures
  • Wear parts inventory list specifying screw segment, die, and cutter part numbers
  • Maintenance schedule aligned with production hours and local spare parts availability

Requesting a Line Configuration Proposal

To move from inquiry to a firm quotation with lead time, provide your target kibble format, primary raw material blend with typical moisture content, and required hourly throughput. Confirm your factory’s available voltage and frequency, plus the control interface language for your operators. Specify whether the line must integrate with existing upstream mixing or downstream packing equipment.

Frequently Asked Questions

Q: How is the screw configuration matched to a specific raw material blend and target kibble density?
A: The screw profile is selected based on your declared ingredient ratios and the required degree of starch gelatinisation. Different formulations — high-meat versus high-grain — demand distinct shear and residence time characteristics. The configuration is documented and validated during the pre-shipment trial run on your actual material.

Q: What barrel temperature profile and moisture range support proper gelatinisation on pet food formulas?
A: Barrel zones are typically staged to progressively increase temperature, with moisture injection calibrated to your recipe’s baseline water content. Insufficient moisture limits expansion; excess moisture requires extended drying. The specific profile is established during the trial run and stored in the PLC as a baseline recipe.

Q: Can the MT70 extrusion parameters produce both floating and sinking feed as well as kibble?
A: Yes, provided the die configuration and screw profile are adjusted for each product type. Floating feed requires higher expansion and lower density than sinking feed, which demands different die land lengths and barrel shear settings. Multi-product capability depends on specifying the correct die inventory and screw segments at the order stage.

Q: How does the PLC control system manage process variables across multiple line stations?
A: The PLC coordinates mixing ratios, extruder barrel temperatures, screw speed, dryer temperature and residence time, and coating drum parameters as an integrated system. Recipe changes are stored digitally, allowing operators to recall validated parameter sets rather than manually adjusting each station, which reduces batch variation.

Q: What does the in-house trial run on customer raw material cover, and what data is delivered?
A: The trial run uses your supplied raw material through the complete extrusion, drying, and coating sequence. The delivered report documents actual throughput, expansion ratio, kibble density, starch gelatinisation level, and any screw or die adjustments made during the test, providing a verified production baseline before shipment.

15+
Years Experience
60+
Countries Served
1000+
Projects Delivered
24/7
Technical Support
Get a Custom Quote

Interested in MT70 Dog & Cat Pet Food Processing Line – PLC Control?

Fill out the form below and our engineering team will respond within 24 hours with a tailored solution.

Sending your inquiry...

Your information is secure and will only be used to respond to your inquiry.

Explore more equipment from our product range

pet food making machine

High Efficiency Durable Stainless Steel Twin Screw Floating Fish Feed Extruder Pet Food Processing Equipment

High Production Capacity: The production line reaches a maximum output of 500 kg/h floating fish feed pellets. well meeting small and medium-scale continuous processing demands. Stainless Steel Structure: Main parts are made of premium stainless steel. corrosion-resistant. durable and convenient for daily cleaning and maintenance. Advanced Twin Screw Extruder: Equipped with powerful motor and stable […]

View Details
pet food making machine

MT135 Twin-Screw Pet Food Extrusion Line – PLC Control

<p><strong>MT135 Twin-Screw Pet Food Extrusion Line, PLC Control, Multi-Species Feed</strong> — designed for consistent starch gelatinisation and expansion across varied formulations.</p> <ul> <li>Screw geometry and die design matched to raw material profile, barrel temperature zones managed via PLC for repeatable density and texture control</li> <li>Handles kibble and aquatic feed formats with moisture and shear calibrated to target floatation, bite or sink characteristics</li> </ul> <p>Pre-shipment trial runs on buyer's actual raw material validate output and pellet specification before the line leaves the factory.</p>

View Details
pet food making machine

MT85 500kg/h Multi-Purpose Pet Food Processing Line for Dogs Cats Birds Fish & More-380V 50Hz Three Phase 45KW

1. Full Automation & High Efficiency The production line offers fully automated processes from raw material mixing. extrusion. drying. to packaging. greatly reducing manual labor and increasing output efficiency. 2. Versatile Recipe Adaptability Supports a wide range of pet food formulas including dry kibble. semi-moist. and treats. catering to different pet dietary requirements and market […]

View Details