Wet Twin Screw Extruder for Floating Sinking Aquatic Fish Feed Pellets – Turnkey Solution
CE Certified
ISO Certified
60+ Countries

Wet Twin Screw Extruder for Floating Sinking Aquatic Fish Feed Pellets – Turnkey Solution

<p><strong>Wet Twin Screw Extruder for Floating & Sinking Aquatic Fish Feed Pellets, PLC Control, Food-Grade 304 SS</strong> — configured for uniform pellet density through matched screw geometry, barrel temperature profile, and die design specific to your raw material formulation.</p> <ul> <li>High-temperature, high-pressure wet extrusion achieves smooth surface finish and precise buoyancy control for catfish, tilapia, shrimp, and ornamental species</li> <li>Continuous PLC monitoring across mixing, extrusion, drying, and coating stations ensures throughput balance without bottlenecks</li> <li>Full line from batching to packing under one supplier, with in-house trial runs on your raw material validating pellet density and floating rate before shipment</li> </ul>

High Efficiency
Customizable
PLC Control
After-Sales Support

Product Description

Wet Twin Screw Extruder for Floating Sinking Aquatic Fish Feed Pellets – Turnkey Solution

Screw configuration matched to formulation — every die and screw segment is specified against your actual raw material blend and target buoyancy, not copied from a generic aquatic feed build.

Technical Specifications

Parameter Value
Product Type Twin Screw Aquatic Fish Feed Extrusion Production Line
Screw Type Twin screw, wet extrusion
Control System Intelligent PLC automatic control
Material Contact Parts Food-grade 304 stainless steel
Line Stations Mixer → Extruder → Dryer → Seasoning/coating machine → Vibrating sieve → Conveyor → Finished product discharging
Automation Level Full continuous automatic production
Pellet Adjustability Size, hardness, buoyancy (floating and sinking)
Energy Features Optimized energy-saving transmission structure and heating system
Maintenance Design Quick replacement of vulnerable parts, convenient daily cleaning
Assembly State Complete matched production configuration
Output Capacity Large stable processing capacity for medium-to-large scale production (basis to be confirmed per raw material formulation, pellet size, and moisture content)
Voltage & Frequency Configurable per destination market
Screw Diameter / L:D Ratio To be confirmed per application
Barrel Zones To be confirmed per application
Die Configuration To be confirmed per pellet size target
Moisture Range Steam or water injection (wet extrusion)
Certification CE and ISO (confirm per line configuration)

Application Suitability

Application Material or Output
Floating feed for catfish and tilapia Fish meal, soybean meal, corn powder with compound additives
Sinking feed for shrimp and bottom-feeding species High-protein formulations with adjusted moisture profiles
Ornamental fish pellets for koi, goldfish, tropical fish Specialty blends requiring uniform density and smooth surface finish
Medium-to-large scale aquaculture operations Continuous mass production of size-graded floating and sinking pellets

Why "One-Size-Fits-All" Extrusion Ruins Pellet Buoyancy

Floating feed that sinks, or sinking pellets that drift — these failures trace back to screw configuration and die design copied from a generic build rather than matched to your actual raw material formulation and target buoyancy.

The twin screw fish feed extrusion technology must be dialed to your specific formulation, not borrowed from someone else’s production sheet.

I once watched a European aquaculture operation pull an entire production run from their packing line because the koi pellets they ordered were supposed to float for sixty seconds before a slow descent, but half the batch sank immediately. The extruder was configured for a standard tilapia formula, not the higher-fat ornamental blend the buyer was running. A few degrees of barrel temperature and one screw segment change would have solved it, but the line shipped with a default setup [NEED_CITE: impact of screw configuration on aquatic feed buoyancy control].

Wet twin screw extruder for floating sinking aquatic fish feed pellets with PLC control panel

Barrel Temperature Profiles and Moisture Control in Wet Extrusion

The wet twin screw extrusion aquatic feed production line relies on precise steam and water injection to precondition raw material before it enters the barrel. Barrel temperature across multiple zones must be set to match the starch gelatinisation point of your specific grain and protein blend. Too much moisture in a high-soybean formulation and the pellets expand past target density; too little and the surface cracks during drying.

Die Geometry and the Floating-versus-Sinking Decision

Every pellet that leaves the die carries the signature of its aperture shape, length, and the pressure profile just behind it. For floating catfish feed, the die must allow sufficient expansion at the moment of exit. For sinking shrimp feed, a tighter die with higher back-pressure compresses the matrix into a denser pellet. Swapping between floating and sinking production on the same line requires a documented die configuration change, not guesswork by the operator. This is where the twin screw fish feed extrusion technology separates operations that hold specification from those that produce off-grade material [NEED_CITE: die design principles for extruded aquatic feed density control].

Reading the Specification Sheet Against Your Raw Material

The screw diameter and length-to-diameter ratio determine how long material stays inside the barrel and how much shear energy it absorbs before reaching the die. A high-fishmeal formulation behaves differently from a corn-dominant blend at identical screw speeds, so the rated output capacity only holds meaning when tied to your actual recipe and target pellet diameter. The PLC control system monitors barrel pressure and temperature across zones, but those set-points must be established during a trial run on your raw material, not assumed from a generic parameter list. Contact parts in food-grade 304 stainless steel resist corrosion from the salt and mineral content typical in aquatic feed blends, extending intervals between screw and barrel replacements.

Detail view of twin screw barrel segments and die assembly for aquatic feed extrusion

The Cost of Skipping a Trial Run on Your Formulation

When an extrusion line ships without a trial run on the buyer’s actual raw material, the first week of production becomes an expensive experiment. Operators adjust barrel temperatures, swap screw elements, and test different die plates while raw material burns through the system and off-spec pellets pile up. The dryer may be undersized for the moisture content your particular formulation exits at, creating a bottleneck that forces the extruder to idle. I have seen this pattern repeat at aquaculture feed operations across different markets, and it always traces back to skipping the trial run that would have surfaced these mismatches before the line left the factory [NEED_CITE: pre-shipment trial run benefits for extrusion line commissioning].

Why Source This Line Through the Extrusion Technology Lens

Every screw segment and die plate is specified against your raw material formulation and target pellet buoyancy rather than pulled from a standard build catalog.

The barrel temperature profile is mapped to your starch and protein blend during a pre-shipment trial run in the testing workshop, so set-points are documented before the line arrives at your facility.

Throughput is calculated across every station — mixer, extruder, dryer, seasoning drum, vibrating sieve — so no single component becomes a bottleneck when running your actual formulation.

Electrical schematics and PLC programming language are confirmed for your destination market before production begins, preventing commissioning delays caused by voltage or control interface mismatches.

Documentation & Verification

  • Line layout and capacity calculation matched to your raw material formulation and target pellet size
  • Screw and die configuration record specifying every barrel zone setting for floating and sinking production
  • Trial run report on your raw material documenting pellet density, floating rate, and surface finish
  • Electrical schematic with voltage and frequency confirmed for your destination market
  • Factory test record with PLC parameter logs from the pre-shipment testing session

Installation, Commissioning & Support

  • Foundation and utility planning based on the complete line footprint including dryer and conveying equipment
  • Dedicated electrical circuits sized to the PLC-controlled extruder motor and multi-zone barrel heating system
  • On-site assembly of all line stations with throughput verification across mixer, extruder, dryer, and coating
  • Initial barrel temperature and screw speed calibration using your raw material to match target pellet buoyancy
  • Operator training on die changeover procedures between floating and sinking pellet configurations
  • Wear parts inventory covering screws, dies, and barrel liners with recommended replacement intervals for aquatic feed

What We Need to Configure Your Line

Send your raw material formulation including protein source, grain ratio, and fat content alongside the target pellet diameter and whether you need floating, sinking, or both. We also need your facility voltage and frequency, the PLC interface language your operators require, and whether your existing packaging line has throughput constraints we should match the extrusion output to.

Frequently Asked Questions

Q: How is screw configuration and die design matched to my raw material and target pellet buoyancy?
A: Each screw segment and die plate is selected based on your specific formulation’s protein content, fat ratio, and starch source. We run a trial on your raw material in our testing workshop, adjusting barrel zones and screw geometry until pellet density, floating rate, and surface finish match your specification. The final configuration is documented and ships with the line.

Q: What barrel temperature profile and moisture control are needed for different aquatic feed formulations?
A: Barrel zone temperatures and steam injection rates vary significantly between a corn-dominant blend and a high-fishmeal recipe. During your pre-shipment trial run, we establish the exact temperature curve and moisture set-points for your formulation, then lock those parameters into the PLC so operators can recall them for each production batch.

Q: Can I do a trial run on my own raw material before shipment to verify pellet density and floating rate?
A: Yes. Our in-house testing workshop runs your actual raw material through the configured extruder, dryer, and coating station before the line ships. You receive a trial run report showing pellet density measurements, floating duration tests, and surface finish documentation against your target specification.

Q: How is throughput balanced between the extruder, dryer, and coating stations to avoid line bottlenecks?
A: We calculate capacity at every station based on your pellet size, moisture content at the extruder exit, and drying time required for your formulation. The dryer length, seasoning drum volume, and conveyor speed are all specified to match the extruder output, so no single station forces the rest of the line to idle.

15+
Years Experience
60+
Countries Served
1000+
Projects Delivered
24/7
Technical Support
Get a Custom Quote

Interested in Wet Twin Screw Extruder for Floating Sinking Aquatic Fish Feed Pellets – Turnkey Solution?

Fill out the form below and our engineering team will respond within 24 hours with a tailored solution.

Sending your inquiry...

Your information is secure and will only be used to respond to your inquiry.

Explore more equipment from our product range

pet food making machine

Twin-Screw Fish Feed Processing Line for Multi-Species – Technical Guide

<p><strong>Twin-Screw Fish Feed Extrusion Line, 304 Stainless Steel, up to 600 kg/h</strong> — engineered for floating and sinking aquatic feed production across trout, salmon and catfish species.</p> <ul> <li>Screw configuration and barrel temperature profile matched to your raw material formulation for consistent starch gelatinisation and target pellet density</li> <li>Die geometry selected to control expansion ratio and final pellet size, ensuring floating/sinking performance meets market specification</li> </ul> <p>In-house testing workshop runs trial batches on your actual raw material before shipment, so product development starts before installation — not after.</p>

View Details
pet food making machine

Twin Screw Fish Feed Extruder Production Line – Extrusion Technology

<p><strong>Twin Screw Fish Feed Extruder Production Line, Food Grade 304 SS, PLC Control</strong> — designed for floating and sinking aquatic feed pellet processing with precise buoyancy and density control.</p> <ul> <li>Screw configuration and die design matched to fish meal, soybean meal, and corn powder formulations, managing barrel temperature zones and moisture for full starch gelatinisation</li> <li>Pellet size, hardness, and expansion ratio adjustable via intelligent PLC interface across line stations from mixing to drying</li> </ul> <p>In-house testing workshop runs trial production on your raw material before shipment, with documented screw and die configuration records for process reproducibility.</p>

View Details
pet food making machine

Full Automatic High Capacity Complete Floating Fish Feed Production Line Aquatic Feed Processing Manufacturing Plant Equipment

This fish feed extruder production line adopts advanced professional twin screw extrusion technology. which can fully ripen raw materials at high temperature and high pressure to produce uniform density and smooth surface floating and sinking fish feed pellets with high molding rate. The equipment supports processing various aquatic raw materials such as fish meal soybean […]

View Details
pet food making machine

Production Line Twin Screw Fish Feed Extrusion Line for Multi-Species Aquatic Feed

<p><strong>Twin Screw Fish Feed Extrusion Line, Up to 600 kg/h, 304 Stainless Steel</strong> — engineered for multi-species aquatic feed production including trout, salmon, and catfish.</p> <p>Screw configuration and die design are matched to your raw material formulation and target pellet buoyancy, controlling expansion and density for consistent floating or sinking output. Downstream drying and coating stations are throughput-balanced to eliminate line bottlenecks.</p> <p>Complete line delivered with in-house trial runs on your raw material before shipment, ensuring product validation prior to installation.</p>

View Details